2026 Best Value Drafting & Design Engineering Technology Schools in the Rocky Mountains Region
[Drafting & Design Engineering Technology](/majors/engineering-technologies/drafting-design-engineering-technology/) programs reward a close look at where your money goes furthest. A high-value program keeps cost low while graduates go on to earn well.
To produce this 2026 ranking, College Factual evaluated 28 schools on the balance of cost and outcomes for drafting & design engineering technology students.
What’s on this page:
2026 Best Value Drafting & Design Engineering Technology Schools in the Rocky Mountains Region
Below are the schools that deliver the strongest value in drafting & design engineering technology, balancing cost against outcomes.
Best Value Drafting & Design Engineering Technology Schools
Our analysis ranked Brigham Young University Idaho the best value for a degree in drafting & design engineering technology in the Rocky Mountains Region. Located in the town of Rexburg, Brigham Young University Idaho is a very large private not-for-profit university. Expect in-state tuition and fees of around $4,800. Typical student debt for drafting & design engineering technology graduates is $13,287. Drafting & Design Engineering Technology graduates of Brigham Young University Idaho earn a median of $43,853 early in their careers. Weighed against typical debt, the earnings make a compelling case for value. The acceptance rate is 96%.
Utah Valley University is a great value for students pursuing a degree in drafting & design engineering technology, landing the #2 spot this year. Located in the city of Orem, Utah Valley University is a very large public university. Expect in-state tuition and fees of around $6,507, with out-of-state students paying around $18,489. Students borrow a median of $16,478 to complete the drafting & design engineering technology program here. Soon after graduation, drafting & design engineering technology degree recipients from Utah Valley University generally make around $55,893. Set against $16,478 in median debt, that is a healthy payoff.
College Of Western Idaho is a great value for students pursuing a degree in drafting & design engineering technology, landing the #3 spot this year. Located in the rural area of Nampa, College Of Western Idaho is a very large public university. Expect in-state tuition and fees of around $3,446, compared with $7,454 for out-of-state students. Students borrow a median of $14,770 to complete the drafting & design engineering technology program here. Early-career drafting & design engineering technology graduates make about $49,248.
Ogden Weber Technical College is a great value for students pursuing a degree in drafting & design engineering technology, landing the #4 spot this year. Set in the city of Ogden, Ogden Weber Technical College is a moderately-sized public institution. Students borrow a median of $8,833 to complete the drafting & design engineering technology program here. Soon after graduation, drafting & design engineering technology degree recipients from Ogden Weber Technical College generally make around $34,308. Weighed against typical debt, the earnings make a compelling case for value.
The strong cost-to-outcome balance at Delta Montrose Technical College earned it the #5 place for drafting & design engineering technology. Set in the rural area of Delta, Delta Montrose Technical College is a small public institution. Students borrow a median of $11,244 to complete the drafting & design engineering technology program here. Soon after graduation, drafting & design engineering technology degree recipients from Delta Montrose Technical College generally make around $32,742. Set against $11,244 in median debt, that is a healthy payoff.
Bridgerland Technical College landed the #6 spot for drafting & design engineering technology value this year. Set in the city of Logan, Bridgerland Technical College is a mid-sized public institution. Drafting & Design Engineering Technology graduates carry a median of $12,000 in student loans. Early-career drafting & design engineering technology graduates make about $28,884. Set against $12,000 in median debt, that is a healthy payoff.
Red Rocks Community College earned the #7 position for value in drafting & design engineering technology this year. Red Rocks Community College is a large public school located in the suburb of Lakewood. Students from in state pay about $4,859 in tuition and fees, compared with $17,459 for out-of-state students. Typical student debt for drafting & design engineering technology graduates is $14,471. Soon after graduation, drafting & design engineering technology degree recipients from Red Rocks Community College generally make around $76,340. That is a strong return on a $14,471 median debt.
Community College Of Denver earned the #8 position for value in drafting & design engineering technology this year. Located in the city of Denver, Community College Of Denver is a large public university. Expect in-state tuition and fees of around $5,058, compared with $17,658 for out-of-state students. Students borrow a median of $18,830 to complete the drafting & design engineering technology program here. Drafting & Design Engineering Technology graduates of Community College Of Denver earn a median of $45,202 early in their careers. Weighed against typical debt, the earnings make a compelling case for value.
Aims Community College ranked #9 on our 2026 list of the best value drafting & design engineering technology schools. Set in the city of Greeley, Aims Community College is a large public institution. Expect in-state tuition and fees of around $2,258, with out-of-state students paying around $11,786. Drafting & Design Engineering Technology graduates carry a median of $11,199 in student loans. Early-career drafting & design engineering technology graduates make about $45,909. Weighed against typical debt, the earnings make a compelling case for value.
Pikes Peak Community College earned the #10 position for value in drafting & design engineering technology this year. Set in the suburb of Colorado Springs, Pikes Peak Community College is a large public institution. In-state tuition and fees average $4,510, with out-of-state students paying around $17,110. Typical student debt for drafting & design engineering technology graduates is $16,066. Drafting & Design Engineering Technology graduates of Pikes Peak Community College earn a median of $41,037 early in their careers. Weighed against typical debt, the earnings make a compelling case for value.
Emily Griffith Technical College ranked #11 on our 2026 list of the best value drafting & design engineering technology schools. Set in the city of Denver, Emily Griffith Technical College is a moderately-sized public institution. Drafting & Design Engineering Technology graduates carry a median of $9,725 in student loans. Soon after graduation, drafting & design engineering technology degree recipients from Emily Griffith Technical College generally make around $42,412. Set against $9,725 in median debt, that is a healthy payoff.
Weber State University earned the #12 position for value in drafting & design engineering technology this year. Set in the city of Ogden, Weber State University is a very large public institution. Students from in state pay about $6,557 in tuition and fees, with out-of-state students paying around $17,545. Students borrow a median of $19,176 to complete the drafting & design engineering technology program here. Drafting & Design Engineering Technology graduates of Weber State University earn a median of $53,920 early in their careers. That is a strong return on a $19,176 median debt.
Front Range Community College landed the #13 spot for drafting & design engineering technology value this year. Front Range Community College is a very large public school located in the suburb of Westminster. Students from in state pay about $4,663 in tuition and fees, while out-of-state students pay about $17,263. Drafting & Design Engineering Technology graduates carry a median of $10,750 in student loans. Drafting & Design Engineering Technology graduates of Front Range Community College earn a median of $33,893 early in their careers. Weighed against typical debt, the earnings make a compelling case for value.
Davis Technical College earned the #14 position for value in drafting & design engineering technology this year. Davis Technical College is a moderately-sized public school located in the suburb of Kaysville. Students borrow a median of $6,262 to complete the drafting & design engineering technology program here. Soon after graduation, drafting & design engineering technology degree recipients from Davis Technical College generally make around $34,093. That is a strong return on a $6,262 median debt.
Montana State University ranked #15 on our 2026 list of the best value drafting & design engineering technology schools. Located in the city of Bozeman, Montana State University is a large public university. Students from in state pay about $8,460 in tuition and fees, compared with $33,287 for out-of-state students. Drafting & Design Engineering Technology graduates carry a median of $23,635 in student loans. Drafting & Design Engineering Technology graduates of Montana State University earn a median of $47,703 early in their careers. Weighed against typical debt, the earnings make a compelling case for value. Roughly 82% of applicants are accepted.
Narrow Drafting & Design Engineering Technology Schools by State
More Drafting & Design Engineering Technology Rankings
View All Drafting & Design Engineering Technology Rankings >
Notes and References
This list is compiled by College Factual (MF_RANKING_2025), 2026 edition. Schools are scored on the balance of cost (tuition and student debt) against student outcomes (post-graduation earnings) — a measure of return on investment, drawn primarily from the U.S. Department of Education (IPEDS and College Scorecard).
Ranking method: College Major Best Value · 28 schools evaluated.
*Averages shown above reflect the top 3 ranked schools only.
- The Integrated Postsecondary Education Data System (IPEDS) from the National Center for Education Statistics (NCES), a branch of the U.S. Department of Education (DOE), serves as the core of our data about colleges.
- Some other college data, including much of the graduate earnings data, comes from the U.S. Department of Education’s (College Scorecard).
More about our data sources and methodologies.
