2027 Best Value Drafting & Design Engineering Technology Schools in the Southeast Region

[Drafting & Design Engineering Technology](/majors/engineering-technologies/drafting-design-engineering-technology/) is a field worth comparing on the balance of cost and outcomes. A high-value program keeps cost low while graduates go on to earn well.
For its 2027 best-value ranking, College Factual looked at 65 schools to find the best return on investment for drafting & design engineering technology students.
What’s on this page:
2027 Best Value Drafting & Design Engineering Technology Schools in the Southeast Region
If you want to know which schools deliver the best value for the drafting & design engineering technology degrees they offer, see the list below.
Best Value Drafting & Design Engineering Technology Schools
Our analysis ranked George C Wallace State Community College Dothan the best value for a degree in drafting & design engineering technology in the Southeast Region. George C Wallace State Community College Dothan is a moderately-sized public school located in the city of Dothan. The average in-state cost of tuition and fees is $4,980, while out-of-state students pay about $8,850. Typical student debt for drafting & design engineering technology graduates is $9,942. Early-career drafting & design engineering technology graduates make about $34,762. That is a strong return on a $9,942 median debt.
The strong cost-to-outcome balance at St Petersburg College earned it the #2 place for drafting & design engineering technology. St Petersburg College is a very large public school located in the city of St. Petersburg. The average in-state cost of tuition and fees is $2,682, while out-of-state students pay about $9,286. Students borrow a median of $24,385 to complete the drafting & design engineering technology program here. Early-career drafting & design engineering technology graduates make about $48,218. That is a strong return on a $24,385 median debt.
Hillsborough Community College is a great value for students pursuing a degree in drafting & design engineering technology, landing the #3 spot this year. Set in the city of Tampa, Hillsborough Community College is a very large public institution. The average in-state cost of tuition and fees is $2,491, while out-of-state students pay about $9,088. Typical student debt for drafting & design engineering technology graduates is $14,000. Soon after graduation, drafting & design engineering technology degree recipients from Hillsborough Community College generally make around $44,101. Weighed against typical debt, the earnings make a compelling case for value.
A rank of #4 makes Trident Technical College one of the best values for drafting & design engineering technology. Located in the city of Charleston, Trident Technical College is a very large public university. Expect in-state tuition and fees of around $4,546, with out-of-state students paying around $8,620. Students borrow a median of $18,116 to complete the drafting & design engineering technology program here. Soon after graduation, drafting & design engineering technology degree recipients from Trident Technical College generally make around $50,166. Set against $18,116 in median debt, that is a healthy payoff.
Students looking for strong value in drafting & design engineering technology will find it at Southern Regional Technical College, which ranked #5. Located in the town of Thomasville, Southern Regional Technical College is a moderately-sized public university. The average in-state cost of tuition and fees is $3,007, while out-of-state students pay about $5,575. Typical student debt for drafting & design engineering technology graduates is $9,086. Drafting & Design Engineering Technology graduates of Southern Regional Technical College earn a median of $44,007 early in their careers. Set against $9,086 in median debt, that is a healthy payoff.
Chattahoochee Technical College earned the #6 position for value in drafting & design engineering technology this year. Set in the suburb of Marietta, Chattahoochee Technical College is a large public institution. In-state tuition and fees average $3,540, with out-of-state students paying around $6,108. Drafting & Design Engineering Technology graduates carry a median of $9,616 in student loans. Soon after graduation, drafting & design engineering technology degree recipients from Chattahoochee Technical College generally make around $44,673. Weighed against typical debt, the earnings make a compelling case for value.
Northwest Shoals Community College earned the #7 position for value in drafting & design engineering technology this year. Located in the city of Muscle Shoals, Northwest Shoals Community College is a moderately-sized public university. The average in-state cost of tuition and fees is $5,131, while out-of-state students pay about $9,001. Drafting & Design Engineering Technology graduates carry a median of $13,312 in student loans. Drafting & Design Engineering Technology graduates of Northwest Shoals Community College earn a median of $33,842 early in their careers. Set against $13,312 in median debt, that is a healthy payoff.
Atlanta Technical College came in at #8 for value in drafting & design engineering technology this year. Set in the city of Atlanta, Atlanta Technical College is a moderately-sized public institution. In-state tuition and fees average $3,382, with out-of-state students paying around $5,950. Drafting & Design Engineering Technology graduates carry a median of $17,655 in student loans. Drafting & Design Engineering Technology graduates of Atlanta Technical College earn a median of $35,441 early in their careers. That is a strong return on a $17,655 median debt.
Hinds Community College earned the #9 position for value in drafting & design engineering technology this year. Set in the rural area of Raymond, Hinds Community College is a large public institution. Expect in-state tuition and fees of around $4,250, compared with $7,300 for out-of-state students. Drafting & Design Engineering Technology graduates carry a median of $16,385 in student loans. Soon after graduation, drafting & design engineering technology degree recipients from Hinds Community College generally make around $34,003. Set against $16,385 in median debt, that is a healthy payoff.
Midlands Technical College ranked #10 on our 2027 list of the best value drafting & design engineering technology schools. Set in the suburb of West Columbia, Midlands Technical College is a large public institution. In-state tuition and fees average $5,100, with out-of-state students paying around $14,700. Typical student debt for drafting & design engineering technology graduates is $17,611. Soon after graduation, drafting & design engineering technology degree recipients from Midlands Technical College generally make around $39,610. Set against $17,611 in median debt, that is a healthy payoff.
Hazard Community And Technical College ranked #11 on our 2027 list of the best value drafting & design engineering technology schools. Set in the town of Hazard, Hazard Community And Technical College is a mid-sized public institution. The average in-state cost of tuition and fees is $4,728, compared with $6,432 for out-of-state students. Drafting & Design Engineering Technology graduates carry a median of $12,212 in student loans. Drafting & Design Engineering Technology graduates of Hazard Community And Technical College earn a median of $32,626 early in their careers. Weighed against typical debt, the earnings make a compelling case for value.
Elizabethtown Community And Technical College ranked #12 on our 2027 list of the best value drafting & design engineering technology schools. Located in the city of Elizabethtown, Elizabethtown Community And Technical College is a moderately-sized public university. Students from in state pay about $4,728 in tuition and fees, with out-of-state students paying around $6,432. Drafting & Design Engineering Technology graduates carry a median of $12,245 in student loans. Soon after graduation, drafting & design engineering technology degree recipients from Elizabethtown Community And Technical College generally make around $45,486. Set against $12,245 in median debt, that is a healthy payoff.
John Tyler Community College ranked #13 on our 2027 list of the best value drafting & design engineering technology schools. Set in the suburb of Chester, John Tyler Community College is a large public institution. Expect in-state tuition and fees of around $5,082, with out-of-state students paying around $11,520. Students borrow a median of $11,262 to complete the drafting & design engineering technology program here. Early-career drafting & design engineering technology graduates make about $36,623. That is a strong return on a $11,262 median debt.
Germanna Community College ranked #14 on our 2027 list of the best value drafting & design engineering technology schools. Set in the rural area of Locust Grove, Germanna Community College is a large public institution. Expect in-state tuition and fees of around $5,257, compared with $11,648 for out-of-state students. Students borrow a median of $10,999 to complete the drafting & design engineering technology program here. Drafting & Design Engineering Technology graduates of Germanna Community College earn a median of $41,880 early in their careers. That is a strong return on a $10,999 median debt.
Manatee Technical College landed the #15 spot for drafting & design engineering technology value this year. Located in the suburb of Bradenton, Manatee Technical College is a mid-sized public university. Students borrow a median of $9,726 to complete the drafting & design engineering technology program here. Soon after graduation, drafting & design engineering technology degree recipients from Manatee Technical College generally make around $38,735. Weighed against typical debt, the earnings make a compelling case for value.
Georgia Northwestern Technical College came in at #16 for value in drafting & design engineering technology this year. Located in the city of Rome, Georgia Northwestern Technical College is a moderately-sized public university. The average in-state cost of tuition and fees is $3,300, compared with $5,868 for out-of-state students. Typical student debt for drafting & design engineering technology graduates is $8,492. Early-career drafting & design engineering technology graduates make about $41,229. Weighed against typical debt, the earnings make a compelling case for value.
Miami Dade College ranked #17 on our 2027 list of the best value drafting & design engineering technology schools. Located in the city of Miami, Miami Dade College is a very large public university. Students from in state pay about $2,838 in tuition and fees, compared with $9,661 for out-of-state students. Typical student debt for drafting & design engineering technology graduates is $15,500. Drafting & Design Engineering Technology graduates of Miami Dade College earn a median of $40,267 early in their careers. Weighed against typical debt, the earnings make a compelling case for value.
Holmes Community College earned the #18 position for value in drafting & design engineering technology this year. Holmes Community College is a moderately-sized public school located in the rural area of Goodman. In-state tuition and fees average $3,710, while out-of-state students pay about $6,610. Typical student debt for drafting & design engineering technology graduates is $13,191. Drafting & Design Engineering Technology graduates of Holmes Community College earn a median of $32,145 early in their careers. That is a strong return on a $13,191 median debt.
Central Carolina Technical College landed the #19 spot for drafting & design engineering technology value this year. Located in the city of Sumter, Central Carolina Technical College is a mid-sized public university. The average in-state cost of tuition and fees is $5,715, with out-of-state students paying around $9,016. Typical student debt for drafting & design engineering technology graduates is $15,750. Drafting & Design Engineering Technology graduates of Central Carolina Technical College earn a median of $40,598 early in their careers. Set against $15,750 in median debt, that is a healthy payoff.
Bevill State Community College landed the #20 spot for drafting & design engineering technology value this year. Set in the town of Jasper, Bevill State Community College is a moderately-sized public institution. Expect in-state tuition and fees of around $4,734, compared with $8,346 for out-of-state students. Typical student debt for drafting & design engineering technology graduates is $11,040. Soon after graduation, drafting & design engineering technology degree recipients from Bevill State Community College generally make around $38,514. That is a strong return on a $11,040 median debt.
Bluegrass Community And Technical College ranked #21 on our 2027 list of the best value drafting & design engineering technology schools. Located in the city of Lexington, Bluegrass Community And Technical College is a large public university. Students from in state pay about $4,808 in tuition and fees, with out-of-state students paying around $6,512. Drafting & Design Engineering Technology graduates carry a median of $13,366 in student loans. Drafting & Design Engineering Technology graduates of Bluegrass Community And Technical College earn a median of $44,431 early in their careers. Set against $13,366 in median debt, that is a healthy payoff.
Ashland Community And Technical College earned the #22 position for value in drafting & design engineering technology this year. Ashland Community And Technical College is a mid-sized public school located in the city of Ashland. Students from in state pay about $4,728 in tuition and fees, with out-of-state students paying around $6,432. Typical student debt for drafting & design engineering technology graduates is $13,485. Early-career drafting & design engineering technology graduates make about $37,826. That is a strong return on a $13,485 median debt.
West Kentucky Community And Technical College landed the #23 spot for drafting & design engineering technology value this year. Located in the city of Paducah, West Kentucky Community And Technical College is a moderately-sized public university. The average in-state cost of tuition and fees is $4,728, with out-of-state students paying around $6,432. Drafting & Design Engineering Technology graduates carry a median of $10,778 in student loans. Early-career drafting & design engineering technology graduates make about $31,903. Weighed against typical debt, the earnings make a compelling case for value.
Alamance Community College placed #24 among the best values for drafting & design engineering technology. Set in the suburb of Graham, Alamance Community College is a moderately-sized public institution. Expect in-state tuition and fees of around $2,592, compared with $8,736 for out-of-state students. Typical student debt for drafting & design engineering technology graduates is $6,625. Drafting & Design Engineering Technology graduates of Alamance Community College earn a median of $37,585 early in their careers. That is a strong return on a $6,625 median debt.
Jones County Junior College ranked #25 on our 2027 list of the best value drafting & design engineering technology schools. Set in the town of Ellisville, Jones County Junior College is a moderately-sized public institution. Students from in state pay about $4,700 in tuition and fees, compared with $5,700 for out-of-state students. Students borrow a median of $9,559 to complete the drafting & design engineering technology program here. Soon after graduation, drafting & design engineering technology degree recipients from Jones County Junior College generally make around $33,655. Weighed against typical debt, the earnings make a compelling case for value.
Rest of the Top 50 Best Value Drafting & Design Engineering Technology Schools
These schools also delivered strong value for drafting & design engineering technology this year:
Narrow Drafting & Design Engineering Technology Schools by State
More Drafting & Design Engineering Technology Rankings
View All Drafting & Design Engineering Technology Rankings >
Notes and References
This ranking is produced by College Factual (MF_RANKING_2025), 2027 edition. Schools are scored on the balance of cost (tuition and student debt) against student outcomes (post-graduation earnings) — a measure of return on investment, drawn primarily from the U.S. Department of Education (IPEDS and College Scorecard).
Ranking method: College Major Best Value · 65 schools evaluated.
*Averages shown above reflect the top 65 ranked schools only.
- The Integrated Postsecondary Education Data System (IPEDS) from the National Center for Education Statistics (NCES), a branch of the U.S. Department of Education (DOE), serves as the core of our data about colleges.
- Some other college data, including much of the graduate earnings data, comes from the U.S. Department of Education’s (College Scorecard).
More about our data sources and methodologies.