2023 Most Focused Doctor’s Degree Colleges for General Materials Engineering
79
Ranked Colleges
712
Degrees Awarded
$34,200
Avg Cost*
It’s not easy to decide which college to attend when there so many options available for students. One of our goals at College Factual is to give you as much information as we can - such as our “Schools for a Doctorate Highly Focused on Materials Processing and Manufacturing Major” ranking - to help you make that decision.
General Materials Engineering is the 199th most popular major in the country with 3,415 degrees awarded in 2020-2021.
At the doctor’s degree level specifically, there were 712 general materials engineering graduates with average earnings and debt of $75,260 and $0 respectively.
For this year’s “Schools for a Doctorate Highly Focused on Materials Processing and Manufacturing Major” ranking, we looked at 79 colleges that offer a degree in general materials engineering. That schools that top this list have a program in general materials engineering in which the largest percentage of students at the school are enrolled.
Check out our ranking methodology for more information.
More Ways to Rank General Materials Engineering Schools
Since picking the right college can be one of the most important decisions of your life, we’ve developed the “Schools for a Doctorate Highly Focused on Materials Processing and Manufacturing Major” ranking, along with many other major-related rankings, to help you make that decision.
In addition to our rankings, you can take two colleges and compare them based on the criteria that matters most to you in our unique tool, College Combat. If you’re torn between two schools, you can use it to help you see how they stack up against one another. Bookmark it so you can compare any new schools that might interest you.
Schools for a Doctorate Highly Focused on Materials Processing and Manufacturing Major
The colleges and universities below are the best for doctor’s degree materials processing and manufacturing students.
Top 25 Most Focused Doctor’s Degree Colleges for General Materials Engineering
Out of the 79 schools in the Schools for a Doctorate Highly Focused on Materials Processing and Manufacturing Major that were part of this year’s ranking, California Institute of Technology landed the #1 spot on the list. Caltech is a small private not-for-profit school situated in Pasadena, California. It awarded 8 doctorate’s materials processing and manufacturing degrees in 2020-2021.
With a undergrad student-to-faculty ratio of 3 to 1, it’s easy to see that the school is committed to helping their undergraduates succeed. The school has an excellent freshman retention rate of 94%, which means students like the school well enough to return for a second year.
Full California Institute of Technology General Materials Engineering Report
You’ll join some of the best and brightest minds around if you attend Massachusetts Institute of Technology. The school came in at #2 for the Schools for a Doctorate Highly Focused on Materials Processing and Manufacturing Major. Massachusetts Institute of Technology is a private not-for-profit institution located in Cambridge, Massachusetts. The school has a fairly large population, and it awarded 27 doctorate’s degrees in 2020-2021.
The low undergrad student loan default rate of 0.3% is a good sign that students have an easier time paying off their loans than they might at other schools. For comparison, the national default rate is 10.1%. The school has an excellent freshman retention rate of 98%, which means students like the school well enough to return for a second year. The impressive undergraduate student-to-faculty ratio of 3 to 1 means that students may have more opportunities to work more closely with their professors than they would at other schools.
Full MIT General Materials Engineering Report
You’ll be in good company if you decide to attend Colorado School of Mines. It ranked #3 on our 2023 Schools for a Doctorate Highly Focused on Materials Processing and Manufacturing Major list. This medium-sized school is located in Golden, Colorado, and it awarded 11 doctorate’s materials processing and manufacturing degrees in 2020-2021.
The low undergrad student loan default rate of 0.7% is a good sign that students have an easier time paying off their loans than they might at other schools. For comparison, the national default rate is 10.1%. The school has an excellent freshman retention rate of 92%, which means students like the school well enough to return for a second year.
Read more about General Materials Engineering at Mines
Out of the 79 schools in the Schools for a Doctorate Highly Focused on Materials Processing and Manufacturing Major that were part of this year’s ranking, New Mexico Institute of Mining and Technology landed the #4 spot on the list. New Mexico Tech is located in Socorro, New Mexico and, has a small student population. In 2020-2021, this school awarded 2 doctorate’s materials processing and manufacturing degrees to qualified students.
The impressive undergraduate student-to-faculty ratio of 8 to 1 means that students may have more opportunities to work more closely with their professors than they would at other schools.
Full New Mexico Tech General Materials Engineering Report
You’ll join some of the best and brightest minds around if you attend Stanford University. The school came in at #5 for the Schools for a Doctorate Highly Focused on Materials Processing and Manufacturing Major. This fairly large school is located in Stanford, California, and it awarded 23 doctorate’s materials processing and manufacturing degrees in 2020-2021.
Students who start out at the school are likely to stick around. The freshman retention rate is 86%. The undergrad student loan default rate at the school is 0.5%, which is quite low when compared to the national default rate of 10.1%. With a undergrad student-to-faculty ratio of 4 to 1, it’s easy to see that the school is committed to helping their undergraduates succeed.
Read full report on General Materials Engineering at Stanford University
Georgia Institute of Technology - Main Campus did quite well in the 2023 Schools for a Doctorate Highly Focused on Materials Processing and Manufacturing Major ranking, coming in at #6. Atlanta, Georgia is the setting for this large institution of higher learning. The public school handed out doctorate’s materials processing and manufacturing degrees to 37 students in 2020-2021.
The school has an excellent freshman retention rate of 97%, which means students like the school well enough to return for a second year. The school has an impressive undergrad student loan default rate. It’s only 0.9%, which is much lower than the national rate of 10.1%.
Read more about General Materials Engineering at Georgia Institute of Technology - Main Campus
With a ranking of #7, Michigan Technological University did quite well on the 2023 Schools for a Doctorate Highly Focused on Materials Processing and Manufacturing Major list. Michigan Technological University is a medium-sized school located in Houghton, Michigan that handed out 7 doctorate’s materials processing and manufacturing degrees in 2020-2021.
The undergrad student loan default rate at the school is 1.9%, which is quite low when compared to the national default rate of 10.1%. The school has an excellent freshman retention rate of 86%, which means students like the school well enough to return for a second year.
Read more about General Materials Engineering at Michigan Technological University
Northwestern University came in at #8 in this year’s edition of the Schools for a Doctorate Highly Focused on Materials Processing and Manufacturing Major ranking. Northwestern is a large private not-for-profit school situated in Evanston, Illinois. It awarded 34 doctorate’s materials processing and manufacturing degrees in 2020-2021.
The undergrad student loan default rate at the school is 0.6%, which is quite low when compared to the national default rate of 10.1%. The school has an excellent freshman retention rate of 97%, which means students like the school well enough to return for a second year. The impressive undergraduate student-to-faculty ratio of 6 to 1 means that students may have more opportunities to work more closely with their professors than they would at other schools.
Read more about General Materials Engineering at Northwestern University
Alfred University ranked #9 on this year’s Schools for a Doctorate Highly Focused on Materials Processing and Manufacturing Major list. Alfred University is a small school located in Alfred, New York that handed out 2 doctorate’s materials processing and manufacturing degrees in 2020-2021.
Read more about General Materials Engineering at Alfred University
Rensselaer Polytechnic Institute did quite well in the 2023 Schools for a Doctorate Highly Focused on Materials Processing and Manufacturing Major ranking, coming in at #10. RPI is located in Troy, New York and, has a medium-sized student population. In 2020-2021, this school awarded 7 doctorate’s materials processing and manufacturing degrees to qualified students.
The school has an impressive undergrad student loan default rate. It’s only 1.3%, which is much lower than the national rate of 10.1%. The school has an excellent freshman retention rate of 91%, which means students like the school well enough to return for a second year.
Read more about General Materials Engineering at Rensselaer Polytechnic Institute
Purdue University - Main Campus ranked #11 on this year’s Schools for a Doctorate Highly Focused on Materials Processing and Manufacturing Major list. Purdue is a large school located in West Lafayette, Indiana that handed out 40 doctorate’s materials processing and manufacturing degrees in 2020-2021.
With a freshman retention rate of 93%, the school does an excellent job of retaining its undergraduate students. The school has an impressive undergrad student loan default rate. It’s only 1.7%, which is much lower than the national rate of 10.1%.
Full Purdue General Materials Engineering Report
Tuskegee University did quite well in the 2023 Schools for a Doctorate Highly Focused on Materials Processing and Manufacturing Major ranking, coming in at #12. This small school is located in Tuskegee, Alabama, and it awarded 2 doctorate’s materials processing and manufacturing degrees in 2020-2021.
Full Tuskegee University General Materials Engineering Report
With a ranking of #13, The University of Tennessee - Knoxville did quite well on the 2023 Schools for a Doctorate Highly Focused on Materials Processing and Manufacturing Major list. Knoxville, Tennessee is the setting for this large institution of higher learning. The public school handed out doctorate’s materials processing and manufacturing degrees to 20 students in 2020-2021.
The low undergrad student loan default rate of 3.1% is a good sign that students have an easier time paying off their loans than they might at other schools. For comparison, the national default rate is 10.1%. With a freshman retention rate of 89%, the school does an excellent job of retaining its undergraduate students.
Read more about General Materials Engineering at UT Knoxville
Missouri University of Science and Technology did quite well in the 2023 Schools for a Doctorate Highly Focused on Materials Processing and Manufacturing Major ranking, coming in at #14. Missouri University of Science and Technology is a medium-sized school located in Rolla, Missouri that handed out 6 doctorate’s materials processing and manufacturing degrees in 2020-2021.
The school has an excellent freshman retention rate of 85%, which means students like the school well enough to return for a second year. The school has an impressive undergrad student loan default rate. It’s only 3.7%, which is much lower than the national rate of 10.1%.
Full Missouri University of Science and Technology General Materials Engineering Report
Worcester Polytechnic Institute landed the #15 spot on the 2023 Schools for a Doctorate Highly Focused on Materials Processing and Manufacturing Major ranking. WPI is a medium-sized private not-for-profit school situated in Worcester, Massachusetts. It awarded 4 doctorate’s materials processing and manufacturing degrees in 2020-2021.
With a freshman retention rate of 95%, the school does an excellent job of retaining its undergraduate students. The undergrad student loan default rate at the school is 1.1%, which is quite low when compared to the national default rate of 10.1%.
Read full report on General Materials Engineering at Worcester Polytechnic Institute
South Dakota School of Mines and Technology ranked #16 on this year’s Schools for a Doctorate Highly Focused on Materials Processing and Manufacturing Major list. South Dakota School of Mines and Technology is a small school located in Rapid City, South Dakota that handed out 1 doctorate’s materials processing and manufacturing degrees in 2020-2021.
The low undergrad student loan default rate of 3.7% is a good sign that students have an easier time paying off their loans than they might at other schools. For comparison, the national default rate is 10.1%.
Read full report on General Materials Engineering at South Dakota School of Mines and Technology
University of California - San Diego came in at #17 in this year’s edition of the Schools for a Doctorate Highly Focused on Materials Processing and Manufacturing Major ranking. UCSD is a large public school situated in La Jolla, California. It awarded 23 doctorate’s materials processing and manufacturing degrees in 2020-2021.
Students who start out at the school are likely to stick around. The freshman retention rate is 94%. The undergrad student loan default rate at the school is 1.0%, which is quite low when compared to the national default rate of 10.1%.
Read more about General Materials Engineering at University of California - San Diego
Lehigh University landed the #18 spot on the 2023 Schools for a Doctorate Highly Focused on Materials Processing and Manufacturing Major ranking. Located in Bethlehem, Pennsylvania, this medium-sized private not-for-profit school handed out 4 degrees to qualified doctorate’s materials processing and manufacturing students in 2020-2021.
The undergraduate student-to-faculty ratio of 9 to 1 is a sign that students will have more opportunities to engage with their professors one-on-one. The low undergrad student loan default rate of 0.7% is a good sign that students have an easier time paying off their loans than they might at other schools. For comparison, the national default rate is 10.1%. With a freshman retention rate of 91%, the school does an excellent job of retaining its undergraduate students.
Full Lehigh General Materials Engineering Report
With a ranking of #19, New Jersey Institute of Technology did quite well on the 2023 Schools for a Doctorate Highly Focused on Materials Processing and Manufacturing Major list. NJIT is a fairly large public school situated in Newark, New Jersey. It awarded 5 doctorate’s materials processing and manufacturing degrees in 2020-2021.
The school has an excellent freshman retention rate of 89%, which means students like the school well enough to return for a second year. The low undergrad student loan default rate of 4.0% is a good sign that students have an easier time paying off their loans than they might at other schools. For comparison, the national default rate is 10.1%.
Read full report on General Materials Engineering at New Jersey Institute of Technology
Boise State University came in at #20 in this year’s edition of the Schools for a Doctorate Highly Focused on Materials Processing and Manufacturing Major ranking. Boise State is located in Boise, Idaho and, has a large student population. In 2020-2021, this school awarded 9 doctorate’s materials processing and manufacturing degrees to qualified students.
The school has an impressive undergrad student loan default rate. It’s only 4.3%, which is much lower than the national rate of 10.1%.
Full Boise State General Materials Engineering Report
University of Connecticut came in at #21 in this year’s edition of the Schools for a Doctorate Highly Focused on Materials Processing and Manufacturing Major ranking. This large school is located in Storrs, Connecticut, and it awarded 13 doctorate’s materials processing and manufacturing degrees in 2020-2021.
The school has an excellent freshman retention rate of 93%, which means students like the school well enough to return for a second year. The undergrad student loan default rate at the school is 2.0%, which is quite low when compared to the national default rate of 10.1%.
Read more about General Materials Engineering at UCONN
University of Illinois at Urbana-Champaign came in at #22 in this year’s edition of the Schools for a Doctorate Highly Focused on Materials Processing and Manufacturing Major ranking. This large school is located in Champaign, Illinois, and it awarded 21 doctorate’s materials processing and manufacturing degrees in 2020-2021.
The low undergrad student loan default rate of 2.3% is a good sign that students have an easier time paying off their loans than they might at other schools. For comparison, the national default rate is 10.1%. Students who start out at the school are likely to stick around. The freshman retention rate is 94%.
Full UIUC General Materials Engineering Report
North Carolina State University came in at #23 in this year’s edition of the Schools for a Doctorate Highly Focused on Materials Processing and Manufacturing Major ranking. NC State is a large public school situated in Raleigh, North Carolina. It awarded 14 doctorate’s materials processing and manufacturing degrees in 2020-2021.
With a freshman retention rate of 94%, the school does an excellent job of retaining its undergraduate students. The school has an impressive undergrad student loan default rate. It’s only 2.0%, which is much lower than the national rate of 10.1%.
Full NC State General Materials Engineering Report
Stony Brook University landed the #24 spot on the 2023 Schools for a Doctorate Highly Focused on Materials Processing and Manufacturing Major ranking. SUNY Stony Brook is a large school located in Stony Brook, New York that handed out 11 doctorate’s materials processing and manufacturing degrees in 2020-2021.
The school has an excellent freshman retention rate of 90%, which means students like the school well enough to return for a second year. The undergrad student loan default rate at the school is 2.0%, which is quite low when compared to the national default rate of 10.1%.
Full Stony Brook University General Materials Engineering Report
University of Michigan - Ann Arbor ranked #25 on this year’s Schools for a Doctorate Highly Focused on Materials Processing and Manufacturing Major list. Ann Arbor, Michigan is the setting for this large institution of higher learning. The public school handed out doctorate’s materials processing and manufacturing degrees to 19 students in 2020-2021.
The undergrad student loan default rate at the school is 1.3%, which is quite low when compared to the national default rate of 10.1%. The school has an excellent freshman retention rate of 96%, which means students like the school well enough to return for a second year.
Full U-M General Materials Engineering Report
college factual
